Home > Signpro > Designing and specifying > BSHSR2520 SR2520 1.5" [38mm] face frame for flexible vinyl See face frame features   C: This frame fits all self hinging Signpro     cabinets S: SR1026 C.S. Cover screws CB: SR1024 corner bracket F: Main frame FC: Frame Cover V: Flexible Vinyl R: Tensioning rod A: 2106A screw FB: frame brace bracket B:Ajustable frame brace G:2105 weather seal gasket S:2107 Corner bracket screws     BSH SR2520 1.5" [38mm] Self-hinging face frame for flexible vinyl sign faces. SIGNPRO SRT System SR2520 and SR2010 are our most widely specified frames for flexible vinyl. The difference between the two frames is the cover. SR2520 has a 1.5" [38 mm] frame border while SR2010 gives your sign box a frameless border appearance. SRT frames use a continuous tensioning rod designed to allow quick and easy tensioning of the vinyl onto the frame with minimum components. SR2520 is an ideal choice for small to large size illuminated signs and used for a variety of applications including premise identification, plaza and mall signage, institutional and public facilities, parking signage, retail signage, advertising and more. SR2520 can be fitted to all Signpro cabinets. Product..dimensions  L: 22'- 3" [6782 mm] Custom lengths are available upon request. Call for lead times and minimum order quantities. Fabrication..dimensions H: Up to 8'- 0" [1219 mm] (Or higher, brace accordingly.) W: Unlimited D: Overall depth vary depending on face frame, see combinations. Painted Surface Exposed surface area for painting  = 5.203 " [132 mm] x perimeter Graphic face material Flexible vinyl  Classification   Outdoor      Indoor       Illuminated       Non-Illuminated . Approved standards Handling  During shop assembly, surface scratches can be avoided by the application of a protective masking tape. DO NOT LIFT extrusion carton with a sling at one point as this can cause excessive presure and bend aluminum extrusion. Care should be taken to keep aluminum extrusion as straight, (flat) as possible. DO NOT stand on extrusion. Service access Hinge open sign face by fully retracting screws located along the bottom inner reveal channel of the sign box . Remove face frame completely by removing all hinging/locking screws from top and bottom reveal of sign and pulling frame straight out from sign cabinet. Face material access Remove face frame cover screws. Use needle-nose pliers to grip tensioning rod from one end and pull out.