|
BSHD-R8740 Regular double sided sign cabinet. |
|
SIGNPRO BSHD-R8740 regular is one of the most widely used double-sided self-hinging aluminum sign cabinets.
BSH8740 can be fitted with any one of over 14 different self hinging
face frames for rigid plastic, flexible vinyl, aluminum sheet, or multi-panel applications. Radius corners are also available for plastic faced signs and flexible vinyl faced signs.
This cabinet extrusion is ideal for small to medium size illuminated signs and is used for a variety of applications including premise identification, plazas and malls signage, institutional and public facilities, parking signage, retail Signage, and more. |
|
|
 |
| Product dimensions |
L:
22'- 3" [6782 mm]
Custom lengths are available upon
request. Call for lead times and minimun order quantities. |
| Fabrication dimensions |
H: Up to
8' [2438 mm] before structural reinforcement is required |
| W: Up to
6' [1829 mm] before structural reinforcement is required |
| D: Overall depth varies depending on face
frame, see combinations. |
| F.S.: 6.48" |
| Painted
Surface |
Exposed
surface area = 8.182" [208 mm] x perimeter.
|
| Classification |
Outdoor Indoor
Illuminated  Non-Illuminated |
|
|
 |
| Approved
standards |
 |
|
| Wire
management raceways |
Available
with pre-punched socket holes @ 2" [51 mm] centres. |
| Illumination |
Standard T12 fluorescent tubes are placed in cabinet centre at 10" [254mm] spacing for even illumination. Optional LED lighting to be installed as per manufacturer's specifications.
|
|
|
 |
| Handling |
During
shop assembly, surface scratches can be avoided by the application of protective masking tape.
DO NOT
lift extrusion carton with a sling at one point as this can cause excessive pressure and bend aluminum extrusion. Care should be taken to keep aluminum extrusion as straight, (flat) as possible.
DO NOT stand on extrusion.
|
|
|
 |
| Service
access |
Hinge
open sign face by full retracting screws located along the bottom inner channel of the
sign box.
Remove face frame completely by removing all hinging/locking screws from top and bottom reveal of sign and pulling frame straight out from sign cabinet.
|
| Face
material access |
For SRT frame for flexible vinyl, remove face frame cover by retracting screws located on top, bottom & sides of the face frame cover. |
