| BSHF-W850 Wide single sided sign cabinet. |
|
SIGNPRO BSHF-W850 is ideal for large vinyl faced signs. It's heavier and deeper sign cabinet
is designed to accommodate vinyl bracing components which keep the vinyl
face tension and smooth.
BSHF-W850
can be fitted with any one of over 14 different self hinging
face frames for rigid plastic, flexible vinyl, aluminum sheet, or multi-panel applications.
This cabinet extrusion is designed for medium to large illuminated signs and is used for a variety of
applications including premise
identification, plaza and malls signage, institutional and public facilities,
parking signage, retail signage, wall mounted signs and more.
| |
|
|
 |
| Product dimensions |
L:
22'- 3" [6782 mm]
Custom lengths are available upon
request. Call for lead times and minimum order quantities.
|
| Fabrication dimensions |
H: Up to
10' before structural reinforcement is required |
| W: Unlimited. |
| D: Overall depth varies depending on face
frame, see combinations.
|
| F.S.: 7.75" |
| Painted Surface |
Exposed
surface area for painting = 8.597" [218 mm] x perimeter
|
| Classification |
Outdoor Indoor
Illuminated 
Non-Illuminated
. |
|
|
 |
| Approved standards |
 |
|
| Wire
management raceways |
Accommodates
both 0' 4" [102 mm] overlap
lamping raceways
Available
with pre-punched socket holes @ 0- 2" [51 mm] |
|
|
| Illumination |
Standard T12 fluorescent tubes are placed at 12" [305mm] spacing for even illumination. Optional LED lighting to be installed as per manufacturer's specifications. |
|
|
 |
| Handling |
During
shop assembly, surface scratches can be avoided by the application of protective masking tape.
DO NOT
lift extrusion carton with a sling at one point as this can cause excessive pressure and bend aluminum extrusion. Care should be taken to keep aluminum extrusion as straight, (flat) as possible.
DO NOT stand on extrusion.
|
 |
| Service
access |
Hinge
open sign face by full retracting screws located along the bottom inner reveal of the
sign box.
Remove face frame completely by removing all hinging/locking screws from top and bottom reveal of sign and pulling frame straight out from sign cabinet.
|
| Face
material access |
For SRT frame for flexible vinyl, remove face frame cover by retracting screws located on top, bottom & sides of the face frame cover. |
