| BSH-7002 Ret-hinge frame adapter |
SIGNPRO BSH-7002 is designed to allow Signpro face frame to be used on non-Signpro cabinets.
Mitre cut and attached around the perimeter of an existing signbox, BSH-7002 can then be fitted
with any one of over 14 different self-hinging
face frames
for rigid plastic, flexible vinyl, or aluminum sheet.
This extrusion is ideal for all illuminated sign sizes and is used for a variety of applications including
premise identification, plaza and mall signage, institutional and public
facilities, parking signage, retail signage, wall mounted signs and
more.
|
|
|
 |
| Product dimensions |
L:
22'- 3" [6782 mm]
Custom lengths are available upon
request. Call for lead times and minimum order quantities.
|
| Fabrication dimensions |
H: No limited. Depends on cabinet structure. |
| W: No limited. Depends on cabinet structure. |
| D: Overall depth varies depending on sign cabinet used.
|
| F.S.: 1.63" |
| Painted
Surface |
Exposed
surface area for painting = 2.851" x perimeter
|
| Classification |
Outdoor Indoor
Illuminated  Non-Illuminated
|
|
|
 |
| Handling |
During
shop assembly, surface scratches can be avoided by the application of protective masking tape.
DO NOT
lift extrusion carton with a sling at one point as this can cause excessive pressure and bend aluminum extrusion. Care should be taken to keep aluminum extrusion as straight, (flat) as possible.
DO NOT stand on extrusion.
|
 |
| Service access |
Hinge
open sign face by full retracting screws located along the bottom inner reveal of the
sign box.
Remove face frame completely by removing all hinging/locking screws from top and bottom reveal of sign and pulling frame straight out from sign cabinet.
|
| Face material access |
For SRT frame for flexible vinyl, remove face frame cover by retracting screws located on top, bottom & sides of the face frame cover. |
