| BSH6250 5/8" [16mm] Face frame for ACRYLIC or POLYCARBONATE. |
SIGNPRO BSH6250 is used
outdoors for small size illuminated signs. For indoor
applications, this face frame can be used for both small to medium size
signs due to less expansion and contraction of the acrylic sign face .
BSH6250 is used for a variety of applications including premise identification,
plazas and malls signage, institutional and public facilities,
parking signage, retail signage, wall-mounted signs and more.
|
|
|
 |
| Product..dimensions |
L:
22'- 3" [6782 mm]
Custom lengths are available upon
request. Call for lead times and minimum order quantities. |
| Fabrication..dimensions |
H: Up to 3'- 0" [915 mm] |
| W: Up to 10' - 0" [3048 mm] |
| D: Overall depth varies depending on
cabinet used, see combinations. |
|
| Painted
Surface |
Exposed
surface area for painting = 3.743" [95 mm] x perimeter |
| Graphic
face material |
Accommodates
1/8" [3 mm] Acrylic or POLYCARBONATE |
|
|
| Classification |
Outdoor Indoor
Illuminated  Non-Illuminated
. |
| Approved
standards |
 |
 |
| Handling |
During
shop assembly, surface scratches can be avoided by the application of a protective masking tape.
DO NOT LIFT extrusion carton with a sling at one point as this can cause excessive presure and bend aluminum extrusion. Care should be taken to keep aluminum extrusion as straight, (flat) as possible. DO NOT stand on extrusion.
|
 |
| Service
access |
Hinge open sign face by fully retracting screws located along the bottom inner reveal channel of the
sign box .
Remove face frame completely by removing all hinging/locking screws from top and bottom reveal of sign and pulling frame straight out from sign cabinet.
|
| Face
material access |
Remove frame from cabinet. Remove assembly screw located on inside top & bottom of one frame end section, then pull frame section outward & remove. Plastic face can now be slid out of frame. |
