Home > Signpro > Designing and specifying > BSH2060 BSH2060 2" [52mm] face frame Two part frame with panel access cover See face frame features C: This frame fits all self hinging Signpro cabinets F: Main frame FC: Frame cover B: 1264 corner bracket S: 2107 frame cover and corner bracket screws L: Lock strip. See BSH2060 Fabrication P: 3/16" [5mm] plastic G: 2105 weather seal gasket A: 2106A Top hinging, Bottom locking screws       BSH2060 2" [52mm] Face frame for ACRYLIC or POLYCARBONATE SIGNPRO BSH2060 is a 2" [51mm] self-hinging face frame for Multi panel or pylon sign applications. The face frame features a two part frame and cover assembly which allows for the removal and replacement of individual panels without having to remove the frame from the cabinet. BSH2060 is an ideal choice for medium to large size multi panel illuminated signs and is used for a variety of applications including premise identification, plazas and malls signage. Product..dimensions  L: 22'- 3" [6782 mm] Custom lengths are available upon request. Call for lead times and minimum order quantities. . Fabrication..dimensions H: Up to 30'- 0" [9144mm] W: Up to 15' - 0" [4572mm] See working with plastic. D: Overall depth vary depending on face frame, see combinations. Painted Surface Exposed surface area for painting  = 5.145 " [131 mm] x perimeter Graphic face material Accommodates 3/16" [5mm] Acrylic or Polycarbonate   Classification   Outdoor      Indoor       Illuminated       Non-Illuminated Approved standards Handling  During shop assembly, surface scratches can be avoided by the application of a protective masking tape. DO NOT LIFT extrusion carton with a sling at one point as this can cause excessive presure and bend aluminum extrusion. Care should be taken to keep aluminum extrusion as straight, (flat) as possible. DO NOT stand on extrusion. Service access Hinge open sign face by fully retracting screws located along the bottom inner reveal channel of the sign box . Remove face frame completely by removing all hinging/locking screws from top and bottom reveal of sign and pulling frame straight out from sign cabinet. Face material access Remove frame cover screws located in reveal channel on either left or right side of face frame. Remove frame cover, then slide out desired acrylic panel.