| BSH1950 1 7/8" Self-hinging face frame for flexible vinyl sign faces. |
SIGNPRO BSH1950, is a heavy-duty blowout proof frame for flexible vinyl. It has a continuous
aluminum-tensioning clip & rod system that allows this frame to be used for medium to large
size structure.
BSH1950 is an ideal choice for large to medium size illuminated signs and is used for a variety of applications including premise
identification, plaza and mall signage, institutional and
public facilities, parking signage, retail signage,
advertising and more. BSH1950 can be fitted to
all Signpro cabinets.
|
|
|
 |
| Product..dimensions |
L:
22'- 3" [6782 mm]
Custom lengths are available upon
request. Call for lead times and minimum order quantities. |
| Fabrication..dimensions |
H: Up to 10' - 0" [3048 mm] (Or higher, braced accordingly) |
|
W: Unlimited |
|
D: Overall depth vary depending on
cabinet used, see combinations. |
| Painted
Surface |
Exposed
surface area for painting = 5.170 " [131 mm] x perimeter |
| Graphic
face material |
Flexible
vinyl |
| Approved
standards |
 |
 |
| Handling |
During
shop assembly, surface scratches can be avoided by the application of a protective masking tape.
DO NOT LIFT extrusion carton with a sling at one point as this can cause excessive presure and bend aluminum extrusion. Care should be taken to keep aluminum extrusion as straight, (flat) as possible. DO NOT stand on extrusion.
|
 |
| Service
access |
Hinge open sign face by fully retracting screws located along the bottom inner reveal channel of the
sign box .
Remove face frame completely by removing all hinging/locking screws from top and bottom reveal of sign and pulling frame straight out from sign cabinet.
|
| Face
material access |
Remove face frame from cabinet. retract all tensioning screws from inner frame & release aluminum tensioning clip using large slot screwdriver. |
