| BSH1800 2" [51mm] Face frame for ACRYLIC or POLYCARBONATE. |
SIGNPRO
BSH1800 quarter round self-hinging
face frame has, like the
BSH2000, a two inch frame border. BSH1800
is an aesthetical or styling alternative to BSH2000 and an ideal choice for medium to large size illuminated signs.
BSH1800 is
used for a variety of both indoor and outdoor applications
including premise
identification, plaza and mall signage, institutional and public facilities,
parking signage, retail signage, advertising and more.
|
|
|
 |
| Product..dimensions |
L:
22'- 3" [6782 mm]
Custom lengths are available upon
request. Call for lead times and minimum order quantities. |
| Fabrication..dimensions |
H: Up to 6'- 0"[1829 mm] |
| W: Up to 31'- 6" [9601mm ] before a customer made compensator may be required. See working with plastic. |
| D: Overall depth vary depending on
cabinet, see combinations. |
|
| Painted
Surface |
Exposed
surface area for painting = 5.145" [131 mm] x perimeter |
| Graphic
face material |
Accommodates
3/16" [5 mm] Acrylic or POLYCARBONATE |
| Classification |
Outdoor Indoor
Illuminated  Non-Illuminated |
| Approved
standards |
 |
 |
| Handling |
During
shop assembly, surface scratches can be avoided by the application of a protective masking tape.
DO NOT LIFT extrusion carton with a sling at one point as this can cause excessive presure and bend aluminum extrusion. Care should be taken to keep aluminum extrusion as straight, (flat) as possible. DO NOT stand on extrusion.
|
 |
| Service
access |
Hinge open sign face by fully retracting screws located along the bottom inner reveal channel of the
sign box .
Remove face frame completely by removing all hinging/locking screws from top and bottom reveal of sign and pulling frame straight out from sign cabinet.
|
| Face
material access |
Remove frame from cabinet. Remove assembly screw located on inside top & bottom of one frame end section, then pull frame section outward & remove. Plastic face can now be slid out of frame. |
