C: This frame fits all self hinging Signpro cabinets F: Face frame B:1254 corner bracket S:2107 corner bracket screws L: Lock strip. See BSH1250 Fabrication P: 3/16" [5mm] plastic G:2105 weather seal gasket A:2106A Top hinging, Bottom locking screws
BSH1250 1.25" [32 mm] Face frame for ACRYLIC or POLYCARBONATE
SIGNPRO BSH1250 is our most widely used frame for acrylic. It is an ideal choice for small to medium size illuminated signs. Radius corners are available in 4" radius for this face frame. BSH1250 is used for a variety of applications including premise identification, plazas and malls signage, institutional and public facilities, parking signage, retail signage, and wall-mounted and more.
Product..dimensions
L: 22'- 3" [6782 mm] Custom lengths are available upon
request. Call for lead times and minimum order quantities.
Fabrication..dimensions
H:
4'- 0" [1219 mm]
W:
Up to 31'- 6" [9601 mm] before a customer made compensator may be required. See working with plastic.
D: Overall depth vary depending on
cabinet, see combinations.
Painted
Surface
Exposed
surface area for painting = 4.220" [107 mm] x perimeter
Graphic
face material
Accommodates
3/16" [5mm] Acrylic or Polycarbonate
Classification
Outdoor Indoor
Illuminated Non-Illuminated
.
Approved
standards
Handling
During
shop assembly, surface scratches can be avoided by the application of a protective masking tape.
DO NOT LIFT extrusion carton with a sling at one point as this can cause excessive presure and bend aluminum extrusion. Care should be taken to keep aluminum extrusion as straight, (flat) as possible. DO NOT stand on extrusion.
Service
access
Hinge open sign face by fully retracting screws located along the bottom inner reveal channel of the
sign box .
Remove face frame completely by removing all hinging/locking screws from top and bottom reveal of sign and pulling frame straight out from sign cabinet.
Face
material access
Remove frame from cabinet. Remove assembly screw located on inside top & bottom of one frame end section, then pull frame section outward & remove. Plastic face can now be slid out of frame.
Outdoor 
Non-Illuminated
