| BSHD-M 1020 Medium double sided sign cabinet. |
|
SIGNPRO BSHD-M1020 is wider & heavier than our regular double sided cabinet and is
designed for larger sign structures. Wider
fillers are structurally stronger to withstand greater wind loads and
accommodate larger internal posts.
BSHD-M1020 is ideal
for to medium size illuminated signs and can be fitted with any one of 14 different self hinging
face frames for rigid plastic, flexible vinyl, aluminum sheet, or multi-panel applications.
Radius corners are also available for plastic faced signs and flexible vinyl faced signs.
The DM (double medium) is used for a variety of applications including
premise identification, plazas and malls signage, institutional and public facilities,
parking signage, retail Signage, and more. |
|
|
|
 |
| Product dimensions |
L:
22'- 3" [6782 mm]
Custom lengths are available upon
request. Call for lead times and minimun order quantities.
|
| Fabrication dimensions |
H: Up to
9' [2743 mm] before structural reinforcement is required. |
| W: Up to
7' [2134 mm] before structural reinforcement is required |
| D:
Overall depth varies depending on face frame used, see combinations. |
| F.S.: 8.68" |
| Painted Surface |
Exposed
surface area = 0'- 10.432" [265 mm]
x perimeter.
|
| Classification |
Outdoor Indoor
Illuminated  Non-Illuminated
. |
|
. |
 |
| Approved
standards |
 |
|
| Wire
management raceways |
Available
with pre-punched lamp socket holes @ 2" [51 mm] centres. |
| Illumination |
Standard T12 fluorescent tubes are placed in cabinet centre at 12" [305mm] spacing for even illumination. Optional LED lighting to be installed as per manufacturer's specifications. |
|
. |
|
|
 |
| Handling |
During
shop assembly, surface scratches can be avoided by the application of protective masking tape.
DO NOT
lift extrusion carton with a sling at one point as this can cause excessive pressure and bend aluminum extrusion. Care should be taken to keep aluminum extrusion as straight, (flat) as possible.
DO NOT stand on extrusion. |
|
. |
 |
| Service
access |
Hinge
open sign face by full retracting screws located along the bottom inner reveal channel of the
sign box.
Remove face frame completely by removing all hinging/locking screws from top and bottom reveal of sign and pulling frame straight out from sign cabinet.
|
| Face
material access |
For SRT frame for flexible vinyl, remove face frame cover by retracting screws located on top, bottom & sides of the face frame cover. |
