| PHP3750 face frame for 1/8" aluminum sheet |
| PHP3750 is designed to hold 1/8" aluminum sheet that is either stud welded or bonded with high strength adhesive. Aluminum sheet faces can be used for incised "push- through" lettering, vinyl graphics, screen printing, etc. When combined with one of five optional cabinet extrusions, PHP3750 can be used for a variety of applications including
premise identification, plaza and mall signage, institutional and public facilities,
parking signage, retail Signage, wall mounted signs and more. |
|
|
|
 |
| Product dimensions |
L:
22'- 3" [6782 mm]
|
| Fabrication dimensions |
H: Up to
8'-0" [2438mm] |
| W: Up to 4'-0" [1219mm] |
D: Overall depth varies depending on cabinet used. See combinations.
|
| Painted Surface |
Exposed
surface area for painting= 2.5 " [64 mm]
x extrusion length.
|
| Graphics face material |
Accommodates 1/8" [3mm] aluminum sheet
|
| Classification |
Outdoor Indoor
Illuminated  Non-Illuminated
. |
|
. |
 |
| Approved
standards |
 |
|
. |
|
|
 |
| Handling |
During
shop assembly, surface scratches can be avoided by the application of protective masking tape.
DO NOT
lift extrusion carton with a sling at one point as this can cause excessive pressure and bend aluminum extrusion. Care should be taken to keep aluminum extrusion as straight, (flat) as possible.
DO NOT stand on extrusion. |
|
. |
 |
| Service
access |
Hinge
open sign face by unlocking frame cam lock or if no lock, by fully retracting screws located along the inner reveal channel of the
sign box.
|
