| PHP3280 3.25" deep double-sided sign retainer. |
|
PHP3280 is a 3.25" overall depth indoor/outdoor sign cabinet extrusion that can be used to fabricate signs with acrylic, polycarbonate, tempered glass,
aluminum sheet or modular panel face materials.
This extrusion is ideal for small to medium size illuminated signs and can be illuminated using LED light panels. PHP3280 is used for a variety of applications including
poster boxes, POP signage, premise identification, plaza and mall signage, institutional and public facilities,
parking signage, retail Signage, wall mounted signs and more. A weather-sealing gasket, optional 1/2 round post, lockable face frames and slim profiles are just a few of the features that make the PHP system the material of choice for many designers, architects and signage consultants. |
|
|
|
 |
| Product dimensions |
L:
22'- 3" [6782 mm]
Custom lengths are available upon
request. Call for lead times and minimun order quantities.
|
| Fabrication dimensions |
H: Up to
8' before structural reinforcement is required. |
| W: 4'-0" |
D: 3.25 "
|
| Painted Surface |
Exposed
surface area for painting= 4.145" [105 mm]
x extrusion length.
|
| Classification |
Outdoor Indoor
Illuminated  Non-Illuminated
. |
|
. |
 |
| Illumination |
Optional LED lighting to be installed as per manufacturer's specifications. |
|
|
|
. |
|
|
 |
| Handling |
During
shop assembly, surface scratches can be avoided by the application of protective masking tape.
DO NOT
lift extrusion carton with a sling at one point as this can cause excessive pressure and bend aluminum extrusion. Care should be taken to keep aluminum extrusion as straight, (flat) as possible.
DO NOT stand on extrusion. |
|
. |
 |
| Service
access |
Hinge
open sign face by unlocking frame cam lock or if no lock, by fully retracting screws located along the inner reveal channel of the
sign box.
|
| Face
material access |
Remove corner assembly screws on one end of sign face frame and pull end section straight out. |
