PFPD4110 is a 4.5" overall depth Flip Frame sign cabinet extrusion that is used to fabricate interior graphic display signs. This cabinet is designed to use either of our 1.25" or 2.5" wide flip frame extrusions. The graphics is typically sandwiched between pieces of acrylic, which are held in place by the Flip Frame.
PFPD4110 is ideal for small to medium size illuminated signs and is used for a variety of applications including
poster boxes, POP signage, wayfinding, premise identification, retail Signage and more.
Product dimensions
L:
12'- 0 " [3.66 m]
Fabrication dimensions
H: Up to
6' [1.83 m] before structural reinforcement is required.
W: Up to
4' - 0"[1.22m]
D: 4.5" [114.3mm]
Painted Surface
Exposed
surface area = 4.283 " [109 mm]
x perimeter.
Classification
Outdoor Indoor
Illuminated Non-Illuminated
.
Wire
management raceways
Accommodates PFPRW adjustable aluminum raceway extrusion.
PFPRW is an adjustable raceway cover that houses the lamp sockets, on/off switch and conceals the ballast and
wiring. They can adjust from LAMP Length + 1.25" [32mm] up to LAMP Length +2.75”[70mm]
Illumination
Standard T5 or T8 fluorescent tubes are placed at 4" [102mm] spacing for even illumination. Optional LED lighting to be installed as per manufacturer's specifications.
Handling
During
shop assembly, surface scratches can be avoided by the application of protective masking tape.
DO NOT
lift extrusion carton with a sling at one point as this can cause excessive pressure and bend aluminum extrusion. Care should be taken to keep aluminum extrusion as straight, (flat) as possible.
DO NOT stand on extrusion.
Service
access
Flip open all four sides of frame and tip out acrylic face material.
Outdoor 
Non-Illuminated
