MIN050 is a super slim 1/2" overall depth Flip Frame that is used to fabricate interior graphic display signs. This frame works with MIN100 1" wide flip frame extrusion. The graphic is typically sandwiched between pieces of acrylic, which are held in place by the MIN100 Flip Frame.
This frame combination is ideal for small size non-illuminated signs and is used for a variety of applications including
poster displays, POP signage, retail Signage, wall-mounted signs and more.
Product dimensions
L:
12'- 0 " [3.66 m]
Fabrication dimensions
H: Up to
2'-0" [610mm]
W: 2' - 0"[610mm]
D: 0.6 " [13mm]
Classification
Outdoor Indoor
Illuminated Non-Illuminated
.
Illumination
Optional LED lighting to be installed as per manufacturer's specifications.
Handling
During
shop assembly, surface scratches can be avoided by the application of protective masking tape.
DO NOT
lift extrusion carton with a sling at one point as this can cause excessive pressure and bend aluminum extrusion. Care should be taken to keep aluminum extrusion as straight, (flat) as possible.
DO NOT stand on extrusion.
Service
access
Flip open all four sides of frame and tip out acrylic face material.
Outdoor 
Indoor
