MID110 is a 1 3/8 " overall depth Flip Frame sign extrusion that is used to fabricate interior graphic display signs. This cabinet is designed to use either of our 1.25" or 2.5" wide flip frame extrusions. The graphic is typically sandwiched between pieces of acrylic, which are held in place by the Flip Frame.
MID110's slim profile is ideal for small to medium size non-illuminated signs and is used for a variety of applications including
poster displays, POP signage, retail Signage, suspended signs and more.
Product dimensions
L:
12'- 0 " [3.66 m]
Fabrication dimensions
H: Up to
4' [1.22 m] before structural reinforcement is required.
W: 4' - 0"[1.22m]
D: 1375" [35mm]
Painted Surface
Exposed
surface area = 1.018 " [26 mm]
x perimeter.
Classification
Outdoor Indoor
Illuminated Non-Illuminated
.
Illumination
Optional LED lighting to be installed as per manufacturer's specifications.
Handling
During
shop assembly, surface scratches can be avoided by the application of protective masking tape.
DO NOT
lift extrusion carton with a sling at one point as this can cause excessive pressure and bend aluminum extrusion. Care should be taken to keep aluminum extrusion as straight, (flat) as possible.
DO NOT stand on extrusion.
Service
access
Flip open all four sides of frame and tip out acrylic face material.
Outdoor 
Indoor
